DINION IP imager 9000 HD
DINION IP imager 9000 HD
SPECIFICATIONS
- Active infrared 1080p30 HD camera specifically
designed for 24-hour perimeter surveillance
- Remotely adjustable high power infrared
illumination for unmatched no-light performance up
to 120 m (394 ft) detection - All-in-one integrated housing with auto zoom/focus
SR lens for quick and easy installation - All-weather, vandal-proof design for reliable longterm
performance - Embedded Intelligent Video Analysis firmware
transforms camera into automated detector
TABLE DESCRIPTION:
Brand Model | DINION IP imager 9000 HD | ||||
---|---|---|---|---|---|
Power | |||||
Power Supply | +12 ~ 24 VDC; 24 VAC; PoE+ (52 VDC nominal) | ||||
Power Consumption | 2.25 A | 27 W (+12 VDC); 1.65 A | 28 VA (24 VAC); 490 mA | 25.5 W (POE+) | ||||
PoE (Power-over- Ethernet) | 802.3at (Type 2); Power level: Class 4 | ||||
Sensor | |||||
Type | 1/2.7-inch CMOS | ||||
Pixels | 1952 x 1092 (2.03MP) | ||||
Video performance | |||||
Minimum illumination (30 IRE, 3200 K, scene reflectivity 89%, F1.6) | |||||
• Color | 0.4lx | ||||
• Monochrome | 0 lx (IR) | ||||
Dynamic range | 76 dB WDR 92 dB WDR (with IAE) | ||||
Video functions | |||||
Day/Night | Color, Monochrome (IR), Auto | ||||
Shutter | Automatic Electronic Shutter (AES) Fixed (1/25[30] to 1/150000) selectable Default shutter | ||||
White Balance | Indoor, Outdoor and Manual | ||||
Backlight compensation | On, Off, Intelligent Auto Exposure | ||||
Noise reduction | Intelligent Dynamic Noise Reduction with separate temporal and spatial adjustments | ||||
Contrast enhancement | On/off | ||||
Sharpness | Sharpness enhancement level selectable | ||||
Privacy Masking | Four independent areas, fully programmable | ||||
Video Motion Analysis | Intelligent Video Analysis | ||||
Other functions | Video watermarking, Alarm mode stamping, Image mirror, Image flip, Contrast, Saturation, Brightness, Pixel counter | ||||
Video streaming | |||||
Video compression | H.264 (MP); M-JPEG | ||||
Streaming | Multiple configurable streams in H.264 and MJPEG, configurable frame rate and bandwidth. Regions of Interest (ROI) | ||||
Overall IP Delay | Min. 120 ms, Max. 340 ms | ||||
GOP structure | IP, IBP, IBBP | ||||
Encoding interval | 1 to 30 [25] fps | ||||
Video resolution (H x V) | |||||
• 1080p HD | 1920 X 1080 | ||||
• 720p HD | 1280 x 720 | ||||
• D1 4:3 (cropped) | 704 x 480 | ||||
• SD upright (cropped) | 400 x 720 | ||||
• 480p SD | Encoding: 704 x 480; Displayed: 854 x 480 | ||||
• 432p SD | 768 x 432 | ||||
• 288p SD | 512 x 288 | ||||
• 240p SD | Encoding: 352 x 240; Displayed: 432 x 240 | ||||
• 144p SD | 256 x 144 | ||||
Audio streaming | |||||
Standard | G.711, 8 kHz sampling rate L16, 16 kHz sampling rate AAC-LC, 48 kbps at 16 kHz sampling rate AAC-LC, 80 kbps at 16 kHz sampling rate | ||||
Signal-to-Noise Ratio | >50 dB | ||||
Audio Streaming | Full-duplex / half duplex | ||||
Local storage | |||||
Internal RAMt | 10 s pre-alarm recording | ||||
Memory card slot | Supports up to 32 GB microSDHC / 2 TB microSDXC card. (An SD card of Class 6 or higher is recommended for HD recording) | ||||
Recording | Continuous recording, ring recording. alarm/ events/schedule recording | ||||
Network | |||||
Protocols | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/ RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIBII), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, no-ip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication | ||||
Encryption | TLS 1.0, SSL, DES, 3DES | ||||
Ethernet | 10/100 Base-T, auto-sensing, half/full duplex | ||||
Connectivity | ONVIF Profile S , Auto-MDIX | ||||
Software | |||||
Unit Configuration | Via web browser or Configuration Manager | ||||
Firmware update | Remotely programmable | ||||
Software viewer | Web browser, Bosch Video Client, or third party software | ||||
Input/output | |||||
Analog video out | CVBS (PAL/NTSC), 1 Vpp, BNC, 75 Ohm | ||||
Audio | 1 x mono line in, 1 x mono line out | ||||
• signal line in | 12 kOhm typical, 1 Vrms max | ||||
• signal line out | 1 Vrms at 1.5 kOhm typical, | ||||
Alarm | 1 input | ||||
• activation voltage | Tolerant from +5 VDC to +40 VDC (+3.3 VDC with DC-coupled 22 kOhm pull-up resistor) | ||||
Alarm | 1 output | ||||
Alarm output voltage | 30 VAC or +40 VDC max. Maximum 0.5 A continuous, 10VA (resistive load only) | ||||
Mechanical | |||||
Dimensions (H x W x L) - Camera and Bracket | 402 x 193 x 309 mm (15.8 x 7.6 x 12.2 in.) | ||||
Dimensions (H x W x L) - Total Assembly | 402 x 193 x 406 mm (15.8 x 7.6 x 16.0 in.) | ||||
Weight- Camera without Junction Box | 6.6 kg (14.5 lb) | ||||
Weight- Junction Box | 1.4 kg (3.1 lb) | ||||
Construction | Corrosion-resistant aluminum | ||||
Color | RAL 9010 pure white with RAL 9005 jet black detail | ||||
Finish | Wet paint | ||||
Window | 3.3 mm (1/8-in.) thick glass | ||||
Bracket | Corrosion-resistant, cable-managed | ||||
Bracket Pan/Tilt Range | Pan: ±90° Tilt: -48°/+44° | ||||
Junction Box | Separate from bracket allowing for wiring and cabling prior to camera installation |